Panamax MIP-15LT Max Image Pro LT 15 Amp Surge Protector

Panamax MIP-15LT Max Image Pro LT 15 Amp Surge Protector

FIREWALL FOR NOISE CIRCUITRY
This technology provides enhanced Neutral-to-Ground Noise Filtration for your digital office equipment. EMI/RFI noise can contaminate the equipment safety ground, which in turn will contaminate the connected digital equipment, and prevent it from operating at peak performance levels.

GFCI COMPATIBILITY
This circuit features an improved 2-stage common-mode architecture that provides compatibility for GFCI's per NEC article 250.6. Complies with UL 1283: Electromagnetic Interference Filters.

NOISE FILTRATION
Circuitry prevents EMI/RFI noise from contaminating the connected digital equipment through the ground wiring.

AUTOMATIC VOLTAGE MONITORING (AVM)
This power monitoring system acts as a gate to prevent unsafe voltages from damaging sensitive electronic equipment. It automatically detects a prolonged over-voltage or under-voltage and disconnects the power to the connected equipment, then reconnects it when the power returns to a safe level. It even protects the MIP-20LT unit.

SIGNALPERFECT TELEPHONE LINE PROTECTION
RJ-11 phone jacks are available to protect a single-line telephone modem (pins 4,5 protected) with fuseless Auto-Resetting technology and optimized circuitry to ensure a clean, clear signal.

WIRING FAULT SAFETY SHUTOFF
This technology will detect a mis-wired wall receptacle or an open-ground by monitoring the voltage between neutral and ground. If an unsafe condition exists, the MIP-20LT will disconnect the power from the connected equipment.

CAT5E ETHERNET LAN PROTECTION
RJ-45 jacks are available to protect one Ethernet 10/100/1000BASE-T network connection (all pins protected).

Key Features

• AVM (Automatic Voltage Monitoring) - Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.
• Separate protection circuits for 10/100/1000 BaseT Ethernet and telephone.
• CAT5e LAN Protection In/Out RJ-45 bi-directional connectors
• Unsafe Power Indicator light
• Line Fault Indicator light
• Ground OK Indicator light
• Power/Filtration OK Indicator light
• Three-stage, GFCI Compatible filter circuit provides high levels of Normal and Common mode EMI/RFI noise filtration.
• Surge Protection - Exclusive Protect or Disconnect circuitry. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment
• Eight foot power cord
• Two rubber strips running the length of the product provide a non-slip grip and prevent marring surface
• Telephone Protection RJ-11 In/Out connectors (2 telco cables included)
• Two Always-on AC outlets
• Includes security lock to prevent theft
• 20 Amp AC configured receptacles

Technical Specifications

Family
Power Conditioners
Line Voltage
120 (Volts)
Number of Outlets
2
Outlet Descriptions
Both outlets filtered and surge protected
Compliance
UL 1283
USB Charging
N/A
Low Voltage Trigger
N/A
AC Power Cord
8 ft. captive cord
Dimensions
10.25" W x 4.75" D x 2.5" H
Weight
4.5 lbs
AC Protection Technology
Protect or Disconnect
Automatic Voltage Monitoring
L-N, L-G, N-G Protection Modes
Thermal Fusing
Undervoltage Shutoff
86 VAC +/- 6 VAC
Over-Voltage Shutoff
138 VAC +/- 8 VAC
Maximum Current Rating
15 (Amps)
Initial Clamping Level
200V Peak
Filtration Technology
RFI/EMI Filtration
Filtration Rating
65 dB @ 100KHz - 1 MHz
Signal Line Protection
1 LAN
1 Tel
Length
8.8 (Inches)
Width
3.4 (Inches)
Height
13.2 (Inches)
Weight
4.7 (Lbs)